Redsbaby Bounce Manual de instrucciones descargar pdf (Pagina 10)

Rear wheels

Fit the rear wheels on the axle housings located on either side of the rear

brakecomponent.Youwillhearandfeelarm‘click’whenthewheels

are locked in place.

IMPORTANT: Ensure you check that the wheels are clicked in correctly

by tugging them outwards. Failure to attach the wheels correctly will

result in them falling off the pram while in use.

To remove, simply press the button in the middle of the wheel to release.

Front swivel wheels

Fit the front swivel wheels by inserting them into the front wheel locks

locatedatthefrontoftheframe.Youwillhearandfeelarm‘click’when

the wheels are locked in place.

Assembling the bassinet and bumper

Note: Your Bounce will come with the bassinet assembled.

1. Place the bassinet lining in the circular frame with the bottom end of

the bassinet lining at the top end of the circular frame.

2. Grip the bassinet lining edge and gently feed into the bottom end of

the circular frame. While feeding the edge through the frame channel, use

yoursecondhandtoplaceangerontheentrytothechannelandapply

slight pressure. This will help feed the edge through smoothly.

The edge of the bassinet lining will slide into the channel freely if done

correctly.

IMPORTANT: Excessive force may result in the lining becoming

dislodged from the channel and damaging the circular frame or your

bassinet lining.

IMPORTANT: Do not continue to apply force or pressure if the bassinet

lining edge becomes stuck. Gently pull the lining out and try again.

WARNING:

• Do not use bassinet once the child can sit up unaided.

• This bassinet is only approved for use with model Redsbaby Bounce.

• The maximum weight of a child that can be carried in this bassinet: 9kgs.

•Onlyusethebassinetintheatposition.Donotrecline.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Sin comentarios

Redsbaby Bounce Manual de instrucciones Pagina 10